Manfrotto 496 Compact Ball Head

Product Highlights :

• Strong and Lightweight
• Handles Fold Flat for Transport
• Quick Release with Camera Plate
• 360 Degree Panning
• 90 / -30° Front and Lateral Tilt
• 3 Bubble Levels

Specifications :

• Construction Technopolymer
• Type Pan/Tilt
• Quick Release Yes, with 200PL-14 plate
• Head Mount Thread Size 3/8"-16
• Spirit Level x3
• Panning Range 360 Degrees
• Tilt 90 / -30°
• Operating Temperature -4.0 to 140°F (-20 to 60°C)
• Height 3.54" (9.0 cm)
• Load Capacity 8.82 lb(4.0 kg)
• Weight 1.26 lb (0.570 kg)

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Two Tilt Drag Settings
• Fixed Pan Drag
• Separate Pan and Tilt Locks
• QR Plate
• 3 Section, 2 Stage Aluminum Legs
• Four Pre-Set Locking Positions
• Easy Link Accessory Port
• Specifications:
  - Load Capacity :  7kg
  - Maximum Height : 170 cm
  - Minimum Height : 19 cm
  - Folded : 69 cm
  - Weight : 2.7 kg
  - Material : AdaptoTechnopolymer , Aluminum
  - Quick Release : Yes, 200PL
  - Camera Mount Thread Size : 1/4"-20
  - Tripod Mount Thread Size : 3/8"-16
  - Bubble Level : Yes
  - Independent Pan Lock : Yes
  - Independent Tilt Lock :Yes

• This Product is Covered by 2-Year Manfrotto Warranty

Product Highlights :

• Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
• Uses a hydraulic system to lock the ball mechanism in place.
• To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
• Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
• Specifications
  Maximum Camera Supported  Medium format, Pro SLR
  Load Capacity  35.3 lb (16 kg)
  Height  4.7" (11.9 cm)
  Quick Release  Yes
  Spirit Level  Yes (horizontal & vertical)
  Tension Control  Yes
  Tripod Mount Thread Size  3/8"-16
  Weight  1.6 lb (725 g)

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty

Product Highlights :

• Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
• Uses a hydraulic system to lock the ball mechanism in place.
• To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
• Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
• Specifications
  Maximum Camera Supported : Medium format
  Load Capacity : 22 lb (10 kg)
  Height : 4.7" (11.9 cm)
  Quick Release : Yes
  Spirit Level : No
  Tension Control : Yes
  Tripod Mount Thread Size : 3/8"-16
  Weight : 1.4 lb (635 g)
  Spikes : No
  Head Type : None
  Head Mount Thread Size : 3/8"-16
  Weight : 5.3 lb (2.4 kg)