Manfrotto MMXPROA4 XPRO Over 4-Section Aluminum Monopod

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty

Product Highlights :

• Portable, lightweight and affordable monopod
• Ideal for outdoor, travel and timer shoots
• Sections : 4

Product Highlights: 

• The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
• It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
• Change supports without disassembling your camera
• Includes a safety lock for extra security
• Quick release system for fast and easy set up
• Easily pair with a variety of camera plates
• This clever adapter includes universal screws
• Specifications:
  - Weight : 0.28Kg
  - Material : Aluminium
  - Height : 2.35cm
  - Length : 10cm
  - Width : 9cm

Product Highlights :

• Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
• It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
• Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
• The head to tripod attachment has 3/8'' female threads.
• The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
• Specifications:
  Load Capacity 17.64 lb (8 kg)
  Ball Sphere Diameter Not Specified by Manufacturer
  Quick Release CR4
  Spirit Level Yes
  Tension Control Yes
  Rotating Head 360°
  Tripod Mount Thread Size
  3/8" female thread (bottom)
  1/4" screw (attachment)
  Plate 410PL
  Height 5.31" (134.87mm)
  Tilt Lateral: ±90°
  Weight  1.54 lb (0.69 kg)

Product Highlights :

• Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
• Uses a hydraulic system to lock the ball mechanism in place.
• To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
• Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
• Specifications
  Maximum Camera Supported : Medium format
  Load Capacity : 22 lb (10 kg)
  Height : 4.7" (11.9 cm)
  Quick Release : Yes
  Spirit Level : No
  Tension Control : Yes
  Tripod Mount Thread Size : 3/8"-16
  Weight : 1.4 lb (635 g)
  Spikes : No
  Head Type : None
  Head Mount Thread Size : 3/8"-16
  Weight : 5.3 lb (2.4 kg)