Joby GripTight Mount PRO for Smartphone

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty

Product Highlights :

• Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
• It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
• Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
• The head to tripod attachment has 3/8'' female threads.
• The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
• Specifications:
  Load Capacity 17.64 lb (8 kg)
  Ball Sphere Diameter Not Specified by Manufacturer
  Quick Release CR4
  Spirit Level Yes
  Tension Control Yes
  Rotating Head 360°
  Tripod Mount Thread Size
  3/8" female thread (bottom)
  1/4" screw (attachment)
  Plate 410PL
  Height 5.31" (134.87mm)
  Tilt Lateral: ±90°
  Weight  1.54 lb (0.69 kg)

Product Highlights :

• 3/8" screw socket at the bottom of the ballhead
• Full metal ballhead
• Quick release shoe
• Made with high quality material

Product Highlights : 

• Reinforced aluminium for outstanding rigidity
• Easy to carry thanks to its compact, fold-away levers
• Quick-release plate so you can frame and shoot quickly
• Extends to a superior height of 165cm
• Includes padded carrying back for maximum portability
• Specifications:
  - Load Capacity : 3 kg
  - Height : 165cm
  - Weight : 1.42 kg
  - Material : Aluminum,Technopolymer
  - Quick Release : Yes
  - Independent Pan Lock : No
  - Independent Tilt Lock : No

Warranty : 

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• An innovative 3D head
• The head can be positioned in virtually any position to get the exact framing of the 0 image
• The rubber grip knobs provide finger tip control

Specifications :

• Attaches By : 1/4 attachment type
• Front Tilt : -30° / 180° tilt range
• Lateral tilt : -90° / 90° head tilt
• Panoramic Rotation : 360°
• Plate Type : 200PL-14
• Load Capacity : 3 kg
• Weight : 0.43 kg
• Working Height : 10.5 cm