Description
Description
Sevenoak SK-EBH01 Pro Electronic Time Lapse/Panoramic Ball Head
SK-EBH01 Pro is a specially designed light weight and portable electronic panorama ball head for use with smart phone, Gopro cameras, and light weight camera around 1.5KG. It is also an easy-to-use time lapse device, users can set different rotating angle and time directly on the device. SK-EBH01 Pro comes with 1/4” screw thread on the top for mounting camera and comes with 1/4” to 3/8” screw hole at the bottom, so it can be used together with tripod, slider or any other device with 1/4” or 3/8” screw thread. With SK-EBH01 Pro, users make their own time lapse videos easily with low budget.
Specifications:
Battery capacity: 1200mAh
Charging voltage: DC 5V/1A
Standby time: over 50 hours
Working time: 6 hours when the load capacity is about 1kg
Battery charge time: 8 hours with included Micro USB cable
Motor: step motor
Max load capacity: 2.0 KG
Features:
Compatible with GoPro, smart phones, 4/3 cameras and light weight DSLRs
Compact, portable, easy to use
Can be used alone or on tripods or sliders
Durable Aluminum construction
Useful for panorama shooting and time lapse
Related Products
Quick View
Manfrotto MT190X3 190X Aluminium 3-Section Camera Tripod
Product Highlights :
- Easy Link attachment for different accessories
- Maximise your creativity with ultra-low shooting positions
- Consistently fast set up with four leg angles
- Robust and long-lasting
- Comfortable QPL levers for easy grip
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 562B-1 Fluid Video Monopod with Sliding Plate
Product Highlights:
- Towering maximum height for flawless overhead shooting
- Features a fluid cartridge to facilitate smooth pans
- Ball joint guarantees expert ground levelling on any terrain
- Retractable feet for smooth and stable movements
- 357 quick release plate that balances camera payloads
- Specifications:
- Load Capacity : 8 kg
- Height : 193cm
- Weight : 2.08 kg
- Material : Aluminium
- Quick Release : Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Quick View
Manfrotto 035C Universal Super Clamp with ratchet handle
Product Highlights :
- Load capacity 15.0 kg
- Clamp range min round tube 55 mm
- Clamp range max round tube 13 mm
- Color black
- Attachment (bottom) 16mm hexagonal M5 & 1/4" threads
Quick View
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported : Medium format
Load Capacity : 22 lb (10 kg)
Height : 4.7" (11.9 cm)
Quick Release : Yes
Spirit Level : No
Tension Control : Yes
Tripod Mount Thread Size : 3/8"-16
Weight : 1.4 lb (635 g)
Spikes : No
Head Type : None
Head Mount Thread Size : 3/8"-16
Weight : 5.3 lb (2.4 kg)
Quick View
Manfrotto 391RC2 Photo/Video Pan & Tilt Head
Product Highlights :
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
Specifications :
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
Quick View
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Quick View
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Quick View
Manfrotto 468MGQ6 Hydrostatic Ball Head
Product Highlights :
- Supports 35.27 lb
- Magnesium Alloy Construction
- Weighs Just 1.76 lb
- Hydraulic Locking System
- Includes Quick Release
- 3 Spirit Levels
- -90 to 90 Degree Tilt Range
- Specifications:
Construction Magnesium alloy
Tripod Attachment 3/8"-16
Friction Control Yes
Independent Pan Lock Yes
Lateral Tilt -90° / 90°
Panoramic Rotation 360 Degrees
Quick Release Yes, with secondary safety system
Camera Plate 1/4"-20
Spirit Level Yes, x3
Load Capacity 35.27 lb (16 kg)
Height 5.12" (13 cm)
Weight 1.76 lb (0.8 kg)
Warranty :
-
This Product is Covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Product Highlights :
- 90° column helps you get the perfect shot every time
- Easily link your camera tripod with accessories
- Smooth movements with leg angle selector
- Rapidly set up thanks to quick power locking
- Crafted to Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 1.65 kg
- Material : Carbon Fiber
- Bubble Level : 1
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
