“Manfrotto 498RC4 Midi Ball Head with RC4” has been added to your cart. View cart
Avenger C-Stand 18 with Sliding Leg (A2018L)
Product Information
Product code: A2018L Category: Tripod & SupportRM870.00
Product Highlights :
- Chrome-Plated Steel Construction
- 30″ Column, 3 Sections, 2 Risers
Warranty :
-
1-Year Avenger Warranty
Related Products
Video Camera Monopod 4 Section
Product Highlights :
- Portable, lightweight and affordable monopod
- Ideal for outdoor, travel and timer shoots
- Sections : 4
Weifeng WT-1003 Monopod
Product Highlights :
- Portable, lightweight, solid and affordable monopod
- Quick release leg lock
- Non slip rubberfoot and nail foot changeable for different condition
- Ideal for outdoor, travel and timer shoots
- Material : Aluminum Alloy
- Sections : 4
- Max Diameter : 26.8mm
- Max Height : 1710mm
- Min Height : 540mm
- Folded Height : 540mm
- Load Capacity : 3kg
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head MKBFRA4R-BH (Red)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto MH293D3-Q2 3-Way Photo Head with Compact Foldable Handles (290 series)
Product Highlights :
- Strong and Lightweight
- Handles Fold Flat for Transport
- Quick Release with Camera Plate
- 360 Degree Panning
- 90 / -30° Front and Lateral Tilt
- 3 Bubble Levels
Specifications :
- Construction Technopolymer
- Type Pan/Tilt
- Quick Release Yes, with 200PL-14 plate
- Head Mount Thread Size 3/8"-16
- Spirit Level x3
- Panning Range 360 Degrees
- Tilt 90 / -30°
- Operating Temperature -4.0 to 140°F (-20 to 60°C)
- Height 3.54" (9.0 cm)
- Load Capacity 8.82 lb(4.0 kg)
- Weight 1.26 lb (0.570 kg)
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto 391RC2 Photo/Video Pan & Tilt Head
Product Highlights :
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
Specifications :
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
Manfrotto MT190X3 190X Aluminium 3-Section Camera Tripod
Product Highlights :
- Easy Link attachment for different accessories
- Maximise your creativity with ultra-low shooting positions
- Consistently fast set up with four leg angles
- Robust and long-lasting
- Comfortable QPL levers for easy grip
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.