JJC FC-26B FLASH DIFFUSER FOR CANON 430EX / 430EX II

Product Highlights:

• A must accessory for off-camera flash photography, these cords feature a metal shoe mount for the flash unit.
• It work with digital SLR Camera and traditional film-based cameras with a hot shoe.

Product Highlights :

• High performance master and slave equipment of multiple flashes photography.
• Through digital FSK 2.4GHz radio wireless transmission, and different photographic effectscan be realized through setting your flash at 360 degrees.
• It design of transceiver, the distance of remote control reaches 100M, suppor ting 7 wireless channels and A/B/C three groups.
• Remotely change the modes and parameters of the flash quickly when using the Canon EOS series DSLR cameras which suppor ts external flash function , such as T TL ratio or  manually set each group of flash output.
• Support high-speed  sync, the max sync speed is 1/8000s*,Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter.
• Transceivers kit consist two similar transceivers,  support  one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make  them into an application form of multiple-flashes,  number of the receivers is not limited.
• Compatible with :
  - ALL YongNuo/ Canon EXII series flashes
  - 5D Mark III
  - New speedlite 600EX RT
  - Canon 1100D 1000D 650D 600D 550D 7D 5DII 5DIII 1DIV 1DIII 5D 1D 1DII 10D 20D 30D 40D 50D

Product Highlights :

• Compatible with different brands of cameras by replacing the JJC connecting cable
• Control Autofocus and Shutter Triggering
• Capture Images without Camera Shake
• Ideal for Taking Long Exposures
• Use for Continuous or Single Exposures
• No Battery Required-Powered by Camera

Replacing :

• S-C1 replacing Canon RS-80N3/TC-80N3
• S-C2 replacing Canon RS-60E3, Pentax CS-205, Contax LA-50, Samsung SR9NX01
• S-N1 replacing Nikon MC-30/MC-36/MC-30A
• S-N2 replacing Nikon MC-DC1
• S-N3 replacing Nikon MC-DC2
• S-P1 replacing Panasonic DMW-RS1/RSL1, Leica CR-D1
• S-S1 replacing Sony RM-S1AM/RM-S1LM, Konica Minolta RC-1000S/RC-1000L
• S-S2 replacing Sony Multi Connector, Sony RM-SPR1
• S-F1 replacing Fujifilm RR-80
• S-F2 compatible with Fujifilm FINEPIX HS50EXR
• S-F3 replacing Fujifilm RR-90
• S-O2 replacing Olympus RM-UC1
• S-NX replacing Samsung ED-SR2NX02
• S-I2 replacing Sigma CR-31
• S-PK1 replacing Pentax CS-310
• S-O3 replacing Olympus RM-CB2
• S-IOS compatible with IOS system

Product Highlights :

• Versatile, reliable remote control kit that will trigger off-camera flash units and studio lights from up to 30meters / 100 feet away
• Provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos
• Wireless Frequency System: 433MHz
• Operating Distance: up to 30meters
• Receiver includes 1/4"-20 tripod mount
• Sync: 1/250s
• Channel: 16 channels
• Transmitter power: 1x 23A battery
• Receiver power: 2x AAA battery
• Wired Remote Control (for DSLR camera with remote socket).
• Wireless Remote Control (for DSLR camera with remote socket).
• Wireless Flash Trigger (for camera speedlight or studio light).
• Weight: Transmitter: 30g (without battery)
• Receiver: 42g (without battery)
• Dimension: Transmitter: 62.6x39.2x27.1mm
• Receiver: 79.9x37.8x33.2mm

Compatibility:

• Nikon SB-900 SB-800 SB-600

Product Highlights :

• Custom made to fit the Nikon SB700 Flash
• Creates a diffused bare bulb effect
• Diffuser softens the harsh light of an electronic flash in bounce mode
• Small and sturdy enough to stash in your camera bag without worrying about damage
• Custom made to fit the Nikon SB700
• Dimensions: approximately 8 x 5 cm
• Material: plastic