Manfrotto MT190XPRO4 190XPRO Aluminium 4-Section Camera Tripod

Product Highlights :

• Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
• Uses a hydraulic system to lock the ball mechanism in place.
• To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
• Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
• Specifications
  Maximum Camera Supported : Medium format
  Load Capacity : 22 lb (10 kg)
  Height : 4.7" (11.9 cm)
  Quick Release : Yes
  Spirit Level : No
  Tension Control : Yes
  Tripod Mount Thread Size : 3/8"-16
  Weight : 1.4 lb (635 g)
  Spikes : No
  Head Type : None
  Head Mount Thread Size : 3/8"-16
  Weight : 5.3 lb (2.4 kg)

Product Highlights: 

• Towering maximum height for flawless overhead shooting
• Features a fluid cartridge to facilitate smooth pans
• Ball joint guarantees expert ground levelling on any terrain
• Retractable feet for smooth and stable movements
• 357 quick release plate that balances camera payloads
• Specifications:
  - Load Capacity : 8 kg
  - Height : 193cm
  - Weight : 2.08 kg
  - Material : Aluminium
  - Quick Release : Yes

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• 3/8" screw socket at the bottom of the ballhead
• Full metal ballhead
• Quick release shoe
• Made with high quality material

Product Highlights:

• The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
• Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
• Shoes attach easily and provide the stability needed.

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty