“Buffalo M32 Monopod” has been added to your basket. View basket
Manfrotto 190go! Aluminum M-Series Tripod with MHXPRO-BHQ2 XPRO Ball Head
Product Information
Product code: MK190GOA4-BHX Category: Tripod & SupportRM1,590.00
Product Highlights :
- Professional aluminium tripod kit with ball head
- Fast operating M-lock mechanism
- Shoot from all angles with a 90° rotating camera tripod
- Easy link makes connecting camera tripod accessories simple
- XPRO ball head for faster composition and shooting
- Load Capacity: 15.4 lb
- Max Height: 64.96″
- Min Height: 3.54″
- Folded Length: 22.44″
- Leg Sections: 4
- Weight: 4.8 lb
- 90° Center Column
- M-Lock System Twist Locks for Fast Setup
- Easy Link Attachment
Warranty :
-
This Product is Covered by 2-Year Manfrotto Warranty
Related Products
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MK190X3-2W 190X Aluminium 3-Section Tripod with XPRO Fluid Head
Product Highlights :
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications:
- Load Capacity : 7kg
- Maximum Height : 170 cm
- Minimum Height : 19 cm
- Folded : 69 cm
- Weight : 2.7 kg
- Material : AdaptoTechnopolymer , Aluminum
- Quick Release : Yes, 200PL
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
Manfrotto MT190X3 190X Aluminium 3-Section Camera Tripod
Product Highlights :
- Easy Link attachment for different accessories
- Maximise your creativity with ultra-low shooting positions
- Consistently fast set up with four leg angles
- Robust and long-lasting
- Comfortable QPL levers for easy grip
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 230 Tripod Snow Shoes
Product Highlights:
-
The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
-
Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
-
Shoes attach easily and provide the stability needed.
Manfrotto MT190XPRO4 190XPRO Aluminium 4-Section Camera Tripod
Product Highlights :
- Capture any shot with 90° column system
- Secure, fast quick power lock
- Easy link makes connecting camera tripod accessories simple
- Smooth movements thanks to leg angle selector
- Made to world-class Italian quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2.1 kg
- Material : Aluminum
- Bubble Level : 1
Warranty :
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto MMCOMPACT-BK Compact Photo Monopod (Black)
Product Highlights :
- Comfortable, rounded rubber handgrip
- Protective cap for securing thread when transporting monopod
- Wrist strap to protect your equipment from damage
- At 330g, the lightest Manfrotto monopod
- Specifications:
- Load Capacity : 1.5 kg
- Height : 145cm
- Weight : 0.32 kg
- Material : Aluminum,Technopolymer
- Quick Release : No
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head (Grey)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm