Manfrotto MPMXPROA3 XPRO 3-Section Photo Monopod, Aluminum

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty

Product Highlights :

• Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
• It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
• Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
• The head to tripod attachment has 3/8'' female threads.
• The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
• Specifications:
  Load Capacity 17.64 lb (8 kg)
  Ball Sphere Diameter Not Specified by Manufacturer
  Quick Release CR4
  Spirit Level Yes
  Tension Control Yes
  Rotating Head 360°
  Tripod Mount Thread Size
  3/8" female thread (bottom)
  1/4" screw (attachment)
  Plate 410PL
  Height 5.31" (134.87mm)
  Tilt Lateral: ±90°
  Weight  1.54 lb (0.69 kg)

Product Highlights :

• 90° column helps you get the perfect shot every time
• Easily link your camera tripod with accessories
• Smooth movements with leg angle selector
• Rapidly set up thanks to quick power locking
• Crafted to Italy’s world-class quality standards
• Specifications:
  - Load Capacity : 7 kg
  - Height : 160cm
  - Weight : 1.65 kg
  - Material : Carbon Fiber
  - Bubble Level : 1

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Shoot from new perspectives thanks to the 90° column system
• Effortless setup thanks to the Quick Power Lock
• Add an accessory via the East Link
• Leg angle selectors guarantee smooth movement
• Accurate framing on 3 axes thanks to the XPRO 3Way head
• Specifications:
  - Load Capacity :  6kg
  - Maximum Height : 173 cm
  - Minimum Height : 8 cm
  - Weight : 3.1 kg
  - Material : Aluminum
  - Quick Release : Yes
  - Camera Mount Thread Size : 1/4"-20
  - Tripod Mount Thread Size : 3/8"-16
  - Bubble Level : Yes
  - Independent Pan Lock : Yes
  - Independent Tilt Lock :Yes

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Comfortable, rounded rubber handgrip
• Protective cap for securing thread when transporting monopod
• Wrist strap to protect your equipment from damage
• At 330g, the lightest Manfrotto monopod
• Specifications:
  - Load Capacity : 1.5 kg
  - Height : 145cm
  - Weight : 0.32 kg
  - Material : Aluminum,Technopolymer
  - Quick Release : No