Manfrotto MVKN8TWING Nitrotech N8 Video Head & 546GB Pro Tripod With Ground-Level Spreader

Product Highlights : 

• Reinforced aluminium for outstanding rigidity
• Easy to carry thanks to its compact, fold-away levers
• Quick-release plate so you can frame and shoot quickly
• Extends to a superior height of 165cm
• Includes padded carrying back for maximum portability
• Specifications:
  - Load Capacity : 3 kg
  - Height : 165cm
  - Weight : 1.42 kg
  - Material : Aluminum,Technopolymer
  - Quick Release : Yes
  - Independent Pan Lock : No
  - Independent Tilt Lock : No

Warranty : 

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
• Uses a hydraulic system to lock the ball mechanism in place.
• To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
• Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
• Specifications
  Maximum Camera Supported : Medium format
  Load Capacity : 22 lb (10 kg)
  Height : 4.7" (11.9 cm)
  Quick Release : Yes
  Spirit Level : No
  Tension Control : Yes
  Tripod Mount Thread Size : 3/8"-16
  Weight : 1.4 lb (635 g)
  Spikes : No
  Head Type : None
  Head Mount Thread Size : 3/8"-16
  Weight : 5.3 lb (2.4 kg)

Product Highlights :

• Two Tilt Drag Settings
• Fixed Pan Drag
• Separate Pan and Tilt Locks
• QR Plate
• 3 Section, 2 Stage Aluminum Legs
• Four Pre-Set Locking Positions
• Easy Link Accessory Port
• Specifications:
  - Load Capacity :  7kg
  - Maximum Height : 170 cm
  - Minimum Height : 19 cm
  - Folded : 69 cm
  - Weight : 2.7 kg
  - Material : AdaptoTechnopolymer , Aluminum
  - Quick Release : Yes, 200PL
  - Camera Mount Thread Size : 1/4"-20
  - Tripod Mount Thread Size : 3/8"-16
  - Bubble Level : Yes
  - Independent Pan Lock : Yes
  - Independent Tilt Lock :Yes

• This Product is Covered by 2-Year Manfrotto Warranty

Product Highlights: 

• Towering maximum height for flawless overhead shooting
• Features a fluid cartridge to facilitate smooth pans
• Ball joint guarantees expert ground levelling on any terrain
• Retractable feet for smooth and stable movements
• 357 quick release plate that balances camera payloads
• Specifications:
  - Load Capacity : 8 kg
  - Height : 193cm
  - Weight : 2.08 kg
  - Material : Aluminium
  - Quick Release : Yes

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty