Product Information
Product code: SK-SW02N Categories: stabiliser &gimbals, Tripod & SupportRM930.00
Product Highlights :
- Fine adjustment Camera Balance Platform
- Integrated quick-release Camera Plate
- Adjustable convergence, precision, three axis gimbal
- Adjustable dynamic balance and inertial control Base Platform
Description
The Sevenoak stabilizer SK-SW02N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 3KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.
The camera platform moves back and forth, and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera’s vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.
Related Products
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MH293D3-Q2 3-Way Photo Head with Compact Foldable Handles (290 series)
Product Highlights :
- Strong and Lightweight
- Handles Fold Flat for Transport
- Quick Release with Camera Plate
- 360 Degree Panning
- 90 / -30° Front and Lateral Tilt
- 3 Bubble Levels
Specifications :
- Construction Technopolymer
- Type Pan/Tilt
- Quick Release Yes, with 200PL-14 plate
- Head Mount Thread Size 3/8"-16
- Spirit Level x3
- Panning Range 360 Degrees
- Tilt 90 / -30°
- Operating Temperature -4.0 to 140°F (-20 to 60°C)
- Height 3.54" (9.0 cm)
- Load Capacity 8.82 lb(4.0 kg)
- Weight 1.26 lb (0.570 kg)
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Weifeng WF593H Ball Head
Product Highlights :
- 3/8" screw socket at the bottom of the ballhead
- Full metal ballhead
- Quick release shoe
- Made with high quality material
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Product Highlights :
- 90° column helps you get the perfect shot every time
- Easily link your camera tripod with accessories
- Smooth movements with leg angle selector
- Rapidly set up thanks to quick power locking
- Crafted to Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 1.65 kg
- Material : Carbon Fiber
- Bubble Level : 1
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
Manfrotto 391RC2 Photo/Video Pan & Tilt Head
Product Highlights :
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
Specifications :
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
Manfrotto MT190XPRO3 190XPRO Aluminium 3-Section Camera Tripod
Product Highlights :
- Shoot from all angles with a 90° rotating camera tripod
- Set up quickly and securely thanks to Quick Power Lock
- Pair easily with your accessories
- Individual leg control provides smooth, sure movement
- Made to meet Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
- Bubble Level : 1
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MT190X3 190X Aluminium 3-Section Camera Tripod
Product Highlights :
- Easy Link attachment for different accessories
- Maximise your creativity with ultra-low shooting positions
- Consistently fast set up with four leg angles
- Robust and long-lasting
- Comfortable QPL levers for easy grip
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto MMCOMPACT-BK Compact Photo Monopod (Black)
Product Highlights :
- Comfortable, rounded rubber handgrip
- Protective cap for securing thread when transporting monopod
- Wrist strap to protect your equipment from damage
- At 330g, the lightest Manfrotto monopod
- Specifications:
- Load Capacity : 1.5 kg
- Height : 145cm
- Weight : 0.32 kg
- Material : Aluminum,Technopolymer
- Quick Release : No