Product Information
Product code: SK-SW03N Categories: stabiliser &gimbals, Tripod & SupportRM830.00
Product Highlights :
- Fine adjustment Camera Balance Platform
- Integrated quick-release Camera Plate
- Adjustable convergence, precision, three axis gimbal
- Adjustable dynamic balance and inertial control Base Platform
Description
The Sevenoak stabilizer SK-SW03N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 1.5KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.
The camera platform moves back and forth, and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera’s vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.
Related Products
Manfrotto MKCOMPACTADV-WH Compact Advanced Aluminium Tripod with 3-Way Head (White)
Product Highlights :
- Reinforced aluminium for outstanding rigidity
- Easy to carry thanks to its compact, fold-away levers
- Quick-release plate so you can frame and shoot quickly
- Extends to a superior height of 165cm
- Includes padded carrying back for maximum portability
- Specifications:
- Load Capacity : 3 kg
- Height : 165cm
- Weight : 1.42 kg
- Material : Aluminum,Technopolymer
- Quick Release : Yes
- Independent Pan Lock : No
- Independent Tilt Lock : No
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MK190X3-2W 190X Aluminium 3-Section Tripod with XPRO Fluid Head
Product Highlights :
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications:
- Load Capacity : 7kg
- Maximum Height : 170 cm
- Minimum Height : 19 cm
- Folded : 69 cm
- Weight : 2.7 kg
- Material : AdaptoTechnopolymer , Aluminum
- Quick Release : Yes, 200PL
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto 460MG 3D Magnesium Camera Head RC2
Product Highlights :
- An innovative 3D head
- The head can be positioned in virtually any position to get the exact framing of the 0 image
- The rubber grip knobs provide finger tip control
Specifications :
- Attaches By : 1/4 attachment type
- Front Tilt : -30° / 180° tilt range
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 3 kg
- Weight : 0.43 kg
- Working Height : 10.5 cm
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm
Manfrotto MMCOMPACT-BK Compact Photo Monopod (Black)
Product Highlights :
- Comfortable, rounded rubber handgrip
- Protective cap for securing thread when transporting monopod
- Wrist strap to protect your equipment from damage
- At 330g, the lightest Manfrotto monopod
- Specifications:
- Load Capacity : 1.5 kg
- Height : 145cm
- Weight : 0.32 kg
- Material : Aluminum,Technopolymer
- Quick Release : No
Manfrotto 562B-1 Fluid Video Monopod with Sliding Plate
Product Highlights:
- Towering maximum height for flawless overhead shooting
- Features a fluid cartridge to facilitate smooth pans
- Ball joint guarantees expert ground levelling on any terrain
- Retractable feet for smooth and stable movements
- 357 quick release plate that balances camera payloads
- Specifications:
- Load Capacity : 8 kg
- Height : 193cm
- Weight : 2.08 kg
- Material : Aluminium
- Quick Release : Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MKCOMPACTADV-BK Compact Advanced Aluminium Tripod with 3-Way Head (Black)
Product Highlights :
- Reinforced aluminium for outstanding rigidity
- Easy to carry thanks to its compact, fold-away levers
- Quick-release plate so you can frame and shoot quickly
- Extends to a superior height of 165cm
- Includes padded carrying back for maximum portability
- Specifications:
- Load Capacity : 3 kg
- Height : 165cm
- Weight : 1.42 kg
- Material : Aluminum,Technopolymer
- Quick Release : Yes
- Independent Pan Lock : No
- Independent Tilt Lock : No
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
Manfrotto MT190X3 190X Aluminium 3-Section Camera Tripod
Product Highlights :
- Easy Link attachment for different accessories
- Maximise your creativity with ultra-low shooting positions
- Consistently fast set up with four leg angles
- Robust and long-lasting
- Comfortable QPL levers for easy grip
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty