-
Manfrotto MMCOMPACT-BK Compact Photo Monopod (Black)
Qty: 1RM130.00
Total:
RM130.00
Description
Description
Create cinematic camera movements with 22″ of travel when using the Sevenoak Carbon Fiber Slider Pro. It features a belt-drive with flywheel system and offers adjustable resistance via two additional bearings on the carriage. The carriage also features a locking knob to hold it in place on the rails. For tripod and stand usage, there are standard 1/4″-20 and 3/8″-16 threads on the bottom, as well as a 5/8″ stand mount receiver built-into the removable track ends (tube fixers).
The flywheel adds inertia to your slider, providing smooth starts and stops. It features a removable handle so you can either “crank” the flywheel or spin it without the handle to drive the slider. In addition, you can easily remove the flywheel if you wish to move the slider without the flywheel. The carbon fiber rails feature threaded ends that enable extending the length by attaching extension rails (not included). The outrigger feet are mounted on the track ends and are individually adjustable for leveling the slider on uneven surfaces.
- Key Features
-
- 22″ of slider travel
- Supports up to 22 pounds of payload
- Flywheel belt-drive system
- Adjustable resistance
- 1/4″-20 and 3/8″-16 tripod threads
- 5/8″ stand mount receivers for C-stands and baby stands
- Individually adjustable outrigger feet
-
- Adjustable rollers help minimize lateral movement for heavier rigs
Related Products
Quick View
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm
Quick View
Manfrotto 468MGRC4 Hydrostatic Ball Head with RC4
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported Medium format, Pro SLR
Load Capacity 35.3 lb (16 kg)
Height 4.7" (11.9 cm)
Quick Release Yes
Spirit Level Yes (horizontal & vertical)
Tension Control Yes
Tripod Mount Thread Size 3/8"-16
Weight 1.6 lb (725 g)
Quick View
Video Camera Monopod 4 Section
Product Highlights :
- Portable, lightweight and affordable monopod
- Ideal for outdoor, travel and timer shoots
- Sections : 4
Quick View
Manfrotto MKCOMPACTADV-WH Compact Advanced Aluminium Tripod with 3-Way Head (White)
Product Highlights :
- Reinforced aluminium for outstanding rigidity
- Easy to carry thanks to its compact, fold-away levers
- Quick-release plate so you can frame and shoot quickly
- Extends to a superior height of 165cm
- Includes padded carrying back for maximum portability
- Specifications:
- Load Capacity : 3 kg
- Height : 165cm
- Weight : 1.42 kg
- Material : Aluminum,Technopolymer
- Quick Release : Yes
- Independent Pan Lock : No
- Independent Tilt Lock : No
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
Quick View
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Quick View
Manfrotto 494RC2 Mini Ball Head with RC2
Product Highlights :
- Small
- Light
- With quick release
- Perfect for amateur's point and shooot activities
Specifications :
- Attaches By : 3/8" female thread attachment type
- Lateral Tilt : -90° / 90° head tilt
- Panoramic Rotation : 360 °
- Plate Type : 200PL-14
- Load Capacity : 4 kg
- Weight : 0.32 kg
- Working Height : 8.5 cm
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported : Medium format
Load Capacity : 22 lb (10 kg)
Height : 4.7" (11.9 cm)
Quick Release : Yes
Spirit Level : No
Tension Control : Yes
Tripod Mount Thread Size : 3/8"-16
Weight : 1.4 lb (635 g)
Spikes : No
Head Type : None
Head Mount Thread Size : 3/8"-16
Weight : 5.3 lb (2.4 kg)
Quick View
Manfrotto 562B-1 Fluid Video Monopod with Sliding Plate
Product Highlights:
- Towering maximum height for flawless overhead shooting
- Features a fluid cartridge to facilitate smooth pans
- Ball joint guarantees expert ground levelling on any terrain
- Retractable feet for smooth and stable movements
- 357 quick release plate that balances camera payloads
- Specifications:
- Load Capacity : 8 kg
- Height : 193cm
- Weight : 2.08 kg
- Material : Aluminium
- Quick Release : Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
