Sevenoak SK-W02N Camera Stabilizer

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty

Product Highlights :

• Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
• Uses a hydraulic system to lock the ball mechanism in place.
• To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
• Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
• Specifications
  Maximum Camera Supported : Medium format
  Load Capacity : 22 lb (10 kg)
  Height : 4.7" (11.9 cm)
  Quick Release : Yes
  Spirit Level : No
  Tension Control : Yes
  Tripod Mount Thread Size : 3/8"-16
  Weight : 1.4 lb (635 g)
  Spikes : No
  Head Type : None
  Head Mount Thread Size : 3/8"-16
  Weight : 5.3 lb (2.4 kg)

Product Highlights :

• Two Tilt Drag Settings
• Fixed Pan Drag
• Separate Pan and Tilt Locks
• QR Plate
• 3 Section, 2 Stage Aluminum Legs
• Four Pre-Set Locking Positions
• Easy Link Accessory Port
• Specifications:
  - Load Capacity :  7kg
  - Maximum Height : 170 cm
  - Minimum Height : 19 cm
  - Folded : 69 cm
  - Weight : 2.7 kg
  - Material : AdaptoTechnopolymer , Aluminum
  - Quick Release : Yes, 200PL
  - Camera Mount Thread Size : 1/4"-20
  - Tripod Mount Thread Size : 3/8"-16
  - Bubble Level : Yes
  - Independent Pan Lock : Yes
  - Independent Tilt Lock :Yes

• This Product is Covered by 2-Year Manfrotto Warranty

Product Highlights :

• An innovative 3D head
• The head can be positioned in virtually any position to get the exact framing of the 0 image
• The rubber grip knobs provide finger tip control

Specifications :

• Attaches By : 1/4 attachment type
• Front Tilt : -30° / 180° tilt range
• Lateral tilt : -90° / 90° head tilt
• Panoramic Rotation : 360°
• Plate Type : 200PL-14
• Load Capacity : 3 kg
• Weight : 0.43 kg
• Working Height : 10.5 cm

Product Highlights :

• Shoot from new perspectives thanks to the 90° column system
• Effortless setup thanks to the Quick Power Lock
• Add an accessory via the East Link
• Leg angle selectors guarantee smooth movement
• Accurate framing on 3 axes thanks to the XPRO 3Way head
• Specifications:
  - Load Capacity :  6kg
  - Maximum Height : 173 cm
  - Minimum Height : 8 cm
  - Weight : 3.1 kg
  - Material : Aluminum
  - Quick Release : Yes
  - Camera Mount Thread Size : 1/4"-20
  - Tripod Mount Thread Size : 3/8"-16
  - Bubble Level : Yes
  - Independent Pan Lock : Yes
  - Independent Tilt Lock :Yes

Warranty :

• This product is covered by 2-Year Manfrotto Warranty