-
Manfrotto Advanced Camera Holster L for DSLR
Qty: 1RM230.00 -
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Qty: 1RM2,310.00
Total:
RM2,540.00
Description
Description
The Sevenoak SK-VAM30 is a heavy-duty but comfortable vest and arm system designed for a wide range of DSLR cameras when used together with Sevenoak stabilizers. SK-VAM30 vest and arm system enables you to stabilize the camera movement and reduce shaking when walking, running, going up and down stairs, and travelling over uneven terrain.
The support arm:
Flexible and durable
Two-section articulated arm
Can be boomed up and down, pivoted in and out, and move side-to-side
12mm and 17mm diameter of the arm post
Weight adjustable
The support vest:
Heavy-duty but comfortable
Can be adjusted to fit a wide range of operators
Easy to set up and quick to break down
Evenly distribute the weight of the system across the operator’s shoulders, back and hips
Compatible with:
SK-HS1/SK-SW02N/SK-SW03N
SK-W01
SK-SW PRO 2
Related Products
Quick View
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head (Grey)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 391RC2 Photo/Video Pan & Tilt Head
Product Highlights :
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
Specifications :
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
Quick View
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Product Highlights :
- 90° column helps you get the perfect shot every time
- Easily link your camera tripod with accessories
- Smooth movements with leg angle selector
- Rapidly set up thanks to quick power locking
- Crafted to Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 1.65 kg
- Material : Carbon Fiber
- Bubble Level : 1
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head MKBFRA4R-BH (Red)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto MMCOMPACT-BK Compact Photo Monopod (Black)
Product Highlights :
- Comfortable, rounded rubber handgrip
- Protective cap for securing thread when transporting monopod
- Wrist strap to protect your equipment from damage
- At 330g, the lightest Manfrotto monopod
- Specifications:
- Load Capacity : 1.5 kg
- Height : 145cm
- Weight : 0.32 kg
- Material : Aluminum,Technopolymer
- Quick Release : No
Quick View
Manfrotto 468MGQ6 Hydrostatic Ball Head
Product Highlights :
- Supports 35.27 lb
- Magnesium Alloy Construction
- Weighs Just 1.76 lb
- Hydraulic Locking System
- Includes Quick Release
- 3 Spirit Levels
- -90 to 90 Degree Tilt Range
- Specifications:
Construction Magnesium alloy
Tripod Attachment 3/8"-16
Friction Control Yes
Independent Pan Lock Yes
Lateral Tilt -90° / 90°
Panoramic Rotation 360 Degrees
Quick Release Yes, with secondary safety system
Camera Plate 1/4"-20
Spirit Level Yes, x3
Load Capacity 35.27 lb (16 kg)
Height 5.12" (13 cm)
Weight 1.76 lb (0.8 kg)
Warranty :
-
This Product is Covered by 2-Year Manfrotto Warranty
Quick View
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Quick View
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm
Quick View
Manfrotto MT190XPRO3 190XPRO Aluminium 3-Section Camera Tripod
Product Highlights :
- Shoot from all angles with a 90° rotating camera tripod
- Set up quickly and securely thanks to Quick Power Lock
- Pair easily with your accessories
- Individual leg control provides smooth, sure movement
- Made to meet Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
- Bubble Level : 1
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Quick View
Manfrotto 468MGRC4 Hydrostatic Ball Head with RC4
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported Medium format, Pro SLR
Load Capacity 35.3 lb (16 kg)
Height 4.7" (11.9 cm)
Quick Release Yes
Spirit Level Yes (horizontal & vertical)
Tension Control Yes
Tripod Mount Thread Size 3/8"-16
Weight 1.6 lb (725 g)
