Product Information
Product code: SK-VAM30 Category: Tripod & SupportRM2,590.00
Product Highlights :
- For Sevenoak SK-HS1/SK-SW02N/SK-SW03N
- For Sevenoak SK-W01 and SK-SW PRO 2
- Supports 12 and 17mm Diameter Posts
- Quick Release Buckles
- Hook-and-Loop Straps
Description
The Sevenoak SK-VAM30 is a heavy-duty but comfortable vest and arm system designed for a wide range of DSLR cameras when used together with Sevenoak stabilizers. SK-VAM30 vest and arm system enables you to stabilize the camera movement and reduce shaking when walking, running, going up and down stairs, and travelling over uneven terrain.
The support arm:
Flexible and durable
Two-section articulated arm
Can be boomed up and down, pivoted in and out, and move side-to-side
12mm and 17mm diameter of the arm post
Weight adjustable
The support vest:
Heavy-duty but comfortable
Can be adjusted to fit a wide range of operators
Easy to set up and quick to break down
Evenly distribute the weight of the system across the operator’s shoulders, back and hips
Compatible with:
SK-HS1/SK-SW02N/SK-SW03N
SK-W01
SK-SW PRO 2
Related Products
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head (Grey)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Product Highlights :
- 90° column helps you get the perfect shot every time
- Easily link your camera tripod with accessories
- Smooth movements with leg angle selector
- Rapidly set up thanks to quick power locking
- Crafted to Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 1.65 kg
- Material : Carbon Fiber
- Bubble Level : 1
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
Manfrotto MK190XPRO4-3W 190 Aluminium 4-Section Tripod with Head
Product Highlights :
- Shoot from new perspectives thanks to the 90° column system
- Effortless setup thanks to the Quick Power Lock
- Add an accessory via the East Link
- Leg angle selectors guarantee smooth movement
- Accurate framing on 3 axes thanks to the XPRO 3Way head
- Specifications:
- Load Capacity : 6kg
- Maximum Height : 173 cm
- Minimum Height : 8 cm
- Weight : 3.1 kg
- Material : Aluminum
- Quick Release : Yes
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm
Video Camera Monopod 4 Section
Product Highlights :
- Portable, lightweight and affordable monopod
- Ideal for outdoor, travel and timer shoots
- Sections : 4
Manfrotto MT190XPRO3 190XPRO Aluminium 3-Section Camera Tripod
Product Highlights :
- Shoot from all angles with a 90° rotating camera tripod
- Set up quickly and securely thanks to Quick Power Lock
- Pair easily with your accessories
- Individual leg control provides smooth, sure movement
- Made to meet Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
- Bubble Level : 1
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Manfrotto 230 Tripod Snow Shoes
Product Highlights:
-
The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
-
Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
-
Shoes attach easily and provide the stability needed.