Product Information
Product code: SK-VAM30 Category: Tripod & SupportRM2,590.00
Product Highlights :
- For Sevenoak SK-HS1/SK-SW02N/SK-SW03N
- For Sevenoak SK-W01 and SK-SW PRO 2
- Supports 12 and 17mm Diameter Posts
- Quick Release Buckles
- Hook-and-Loop Straps
Description
The Sevenoak SK-VAM30 is a heavy-duty but comfortable vest and arm system designed for a wide range of DSLR cameras when used together with Sevenoak stabilizers. SK-VAM30 vest and arm system enables you to stabilize the camera movement and reduce shaking when walking, running, going up and down stairs, and travelling over uneven terrain.
The support arm:
Flexible and durable
Two-section articulated arm
Can be boomed up and down, pivoted in and out, and move side-to-side
12mm and 17mm diameter of the arm post
Weight adjustable
The support vest:
Heavy-duty but comfortable
Can be adjusted to fit a wide range of operators
Easy to set up and quick to break down
Evenly distribute the weight of the system across the operator’s shoulders, back and hips
Compatible with:
SK-HS1/SK-SW02N/SK-SW03N
SK-W01
SK-SW PRO 2
Related Products
Manfrotto MK190X3-2W 190X Aluminium 3-Section Tripod with XPRO Fluid Head
Product Highlights :
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications:
- Load Capacity : 7kg
- Maximum Height : 170 cm
- Minimum Height : 19 cm
- Folded : 69 cm
- Weight : 2.7 kg
- Material : AdaptoTechnopolymer , Aluminum
- Quick Release : Yes, 200PL
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported : Medium format
Load Capacity : 22 lb (10 kg)
Height : 4.7" (11.9 cm)
Quick Release : Yes
Spirit Level : No
Tension Control : Yes
Tripod Mount Thread Size : 3/8"-16
Weight : 1.4 lb (635 g)
Spikes : No
Head Type : None
Head Mount Thread Size : 3/8"-16
Weight : 5.3 lb (2.4 kg)
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Weifeng WF593H Ball Head
Product Highlights :
- 3/8" screw socket at the bottom of the ballhead
- Full metal ballhead
- Quick release shoe
- Made with high quality material
Manfrotto MK190XPRO4-3W 190 Aluminium 4-Section Tripod with Head
Product Highlights :
- Shoot from new perspectives thanks to the 90° column system
- Effortless setup thanks to the Quick Power Lock
- Add an accessory via the East Link
- Leg angle selectors guarantee smooth movement
- Accurate framing on 3 axes thanks to the XPRO 3Way head
- Specifications:
- Load Capacity : 6kg
- Maximum Height : 173 cm
- Minimum Height : 8 cm
- Weight : 3.1 kg
- Material : Aluminum
- Quick Release : Yes
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MT190XPRO4 190XPRO Aluminium 4-Section Camera Tripod
Product Highlights :
- Capture any shot with 90° column system
- Secure, fast quick power lock
- Easy link makes connecting camera tripod accessories simple
- Smooth movements thanks to leg angle selector
- Made to world-class Italian quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2.1 kg
- Material : Aluminum
- Bubble Level : 1
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto 391RC2 Photo/Video Pan & Tilt Head
Product Highlights :
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
Specifications :
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
Manfrotto 494RC2 Mini Ball Head with RC2
Product Highlights :
- Small
- Light
- With quick release
- Perfect for amateur's point and shooot activities
Specifications :
- Attaches By : 3/8" female thread attachment type
- Lateral Tilt : -90° / 90° head tilt
- Panoramic Rotation : 360 °
- Plate Type : 200PL-14
- Load Capacity : 4 kg
- Weight : 0.32 kg
- Working Height : 8.5 cm
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.